Scale Prediction, Prevention & Removal
Have Questions ?
Scale Prediction, Prevention & Removal - PE-SPR-PEA27
| Code | Date | Time | Duration | Location | Currency | Early Bird Fee Per Person |
|---|---|---|---|---|---|---|
| PE-SPR-PEA27 | 15 - 19 Feb 2027 | 10 AM CST | 4 Hours Per Day |
Online |
USD |
3000 |
Need this for a group? We deliver the same course in-house — face-to-face at your location or online — tailored to your assets and team level. Contact info@peassociations.com.
Boost your team's skills and your budget! Enjoy group discounts for collaborative learning. Send an inquiry to info@peassociations.com.
Scale Prediction, Prevention & Removal
This course
covers oilfield scale from prediction to removal. Participants study scale
types and formation mechanisms, water analysis and scaling tendency
calculation, scale inhibitors and their selection, squeeze design and
modelling, continuous injection, monitoring and residual analysis, chemical and
mechanical removal, and scale management across a field.
Description
Scale forms when produced water becomes supersaturated as pressure and temperature fall or when incompatible waters mix, most commonly when injected seawater meets formation water containing barium or strontium. It deposits in the formation, perforations, tubing, pumps, valves and surface equipment, and once it has formed it is far harder and more expensive to remove than to have prevented.
This course covers the full subject. It starts with scale types, formation mechanisms and where each is likely to deposit, then covers water sampling and analysis, ionic balance checking and the calculation of scaling tendency and mass precipitated. It then covers inhibitor chemistry and selection, laboratory testing, squeeze treatment design including adsorption and precipitation squeezes, placement, shut-in and return curve interpretation, and continuous injection systems. The course closes with residual monitoring, scale detection, chemical dissolvers and mechanical removal methods, and the design of a field-wide scale management strategy.
The most damaging scales in oilfield production are the sulphates and the carbonates. Barium sulphate forms when sulphate-rich injection water mixes with barium-rich formation water, and it is almost insoluble in acid, which makes removal difficult. Calcium carbonate forms as pressure drops and carbon dioxide breaks out, raising pH, and it is at least acid-soluble. Both can seal perforations and block pumps within weeks in a bad well.
Prediction is well established. A complete water analysis with the operating pressure and temperature profile allows saturation ratios and the mass of scale precipitated to be calculated along the production system, which shows both whether scale will form and where. Mixing calculations across a range of seawater fractions show when in the water breakthrough history the risk peaks, which is often not at the highest water cut.
Prevention means getting inhibitor to the point where scale forms, continuously, at above the minimum effective concentration. For surface and tubing scale, injection at the wellhead or downhole injection point works. For scale forming in the formation, the inhibitor must be squeezed into the rock and returned slowly with the produced water, which is a treatment with its own design, placement and lifetime. Monitoring residuals is what tells the engineer when the next squeeze is due.
By the end of this training, participants will be able to:
- Identify the common oilfield scales and their formation mechanisms.
- Plan water sampling and validate water analyses.
- Calculate scaling tendency, saturation ratio and mass precipitated.
- Predict scale risk from mixing formation and injection waters.
- Select scale inhibitors and specify laboratory qualification tests.
- Design adsorption and precipitation squeeze treatments.
- Plan squeeze placement, shut-in and flowback, and interpret return curves.
- Design continuous inhibitor injection systems and dosage.
- Monitor inhibitor residuals and detect scale deposition.
- Select chemical and mechanical scale removal methods and plan a field scale management strategy.
Organisations sending participants to this training will:
- Predict scale risk before it damages wells and equipment.
- Reduce deferment and workovers caused by scale.
- Improve squeeze treatment design and squeeze life.
- Optimise inhibitor cost through residual-based dosing.
- Build a field-wide scale management strategy linked to water breakthrough.
Participants will:
- Understand why and where scale forms.
- Be able to calculate scaling tendency from a water analysis.
- Be able to design a squeeze treatment and interpret its return curve.
- Be able to specify inhibitor selection and testing.
- Be able to choose removal methods when prevention has failed.
- Production engineers
- Production chemists and chemical treatment engineers
- Flow assurance engineers
- Well intervention engineers
- Facilities and process engineers
- Operations engineers in waterflooded fields
Module 1: Scale Types and Mechanisms
- Carbonate scales
- Sulphate scales: barium, strontium and calcium
- Sulphide, halite and exotic scales
- Supersaturation, nucleation and crystal growth
- Where each scale deposits in the production system
Module 2: Water Analysis
- Sampling formation, injection and produced water
- Preservation and handling
- Standard analyses and ionic balance checks
- Interpreting a water analysis
- Common analytical errors
Module 3: Scale Prediction
- Saturation ratio and scaling index calculation
- Mass of scale precipitated
- Pressure and temperature effects along the system
- Mixing calculations for injection water breakthrough
- Prediction across field life
Module 4: Scale Inhibitors
- Inhibitor chemistries and mechanisms
- Minimum inhibitor concentration
- Thermal stability and calcium tolerance
- Laboratory qualification testing
- Compatibility with other chemicals and formation
Module 5: Squeeze Treatment Design
- Adsorption and precipitation squeezes
- Treatment volumes and placement
- Preflush, main pill, overflush and shut-in
- Squeeze lifetime prediction
- Formation damage risk and its control
Module 6: Squeeze Execution and Return Curves
- Job procedures and pumping
- Flowback and clean-up
- Residual sampling schedule
- Interpreting return curves
- Deciding when to re-squeeze
Module 7: Continuous Injection
- Injection points: surface, wellhead and downhole
- Capillary and umbilical injection
- Dosage setting and control
- Injection system reliability
Module 8: Monitoring and Detection
- Residual analysis methods
- Scale coupons and monitoring devices
- Production data indicators of scaling
- Deposit sampling and analysis
Module 9: Scale Removal and Field Strategy
- Acid and chelant dissolvers
- Barium sulphate dissolver systems
- Mechanical and jetting removal
- Milling and intervention options
- Building a field scale management strategy
- Cost management and performance tracking
Upon successful completion of this training course, delegates will be awarded an official Certificate of Completion issued by the Petroleum Engineers Association (PEA), an ISO 9001:2015 certified training organization. The certificate carries 10 Credits and formally records the total learning hours completed.
Each certificate is signed by the Course Facilitator and the CEO of the Petroleum Engineers Association, and serves as verifiable proof of professional training that delegates can present to employers and professional bodies worldwide.
Frequently Asked Questions
All course bookings made through PEA are strictly non-refundable. By registering for a course, you acknowledge and accept that all fees are payable in full and are not subject to refund under any circumstances, including changes in personal or professional commitments or partial attendance.
PEA reserves the right to make reasonable adjustments to course content, trainers, or schedules where necessary, without entitling delegates to a refund. Comprehensive details of each course — including objectives, target audience, and content — are clearly outlined before enrolment, and it is the responsibility of the delegate to ensure the course's suitability prior to booking.
For any inquiries related to cancellations or bookings, please contact our support team, who will be happy to assist you.