Production Modeling & Optimization with Nodal Analysis
Have Questions ?
Production Modeling & Optimization with Nodal Analysis - PE-PMO-PEA27
| Code | Date | Time | Duration | Location | Currency | Early Bird Fee Per Person |
|---|---|---|---|---|---|---|
| PE-PMO-PEA27 | 08 - 12 Mar 2027 | 10 AM CST | 4 Hours Per Day |
Online |
USD |
3000 |
Need this for a group? We deliver the same course in-house — face-to-face at your location or online — tailored to your assets and team level. Contact info@peassociations.com.
Boost your team's skills and your budget! Enjoy group discounts for collaborative learning. Send an inquiry to info@peassociations.com.
Production Modeling & Optimization with Nodal Analysis
Description
A well model is useful only when it matches what the well actually does. This course takes participants from basic nodal analysis to calibrated production models that can be trusted for decisions. It starts with the data a model needs and how to quality-check it, then covers PVT modelling and matching, selection and calibration of inflow models, and matching vertical lift correlations to gradient surveys and well tests. Choke modelling and sizing complete the single-well picture.
The second part of the course uses calibrated models for optimisation. Participants model gas lift and ESP wells, run sensitivity studies to find the best available production gains, and link wells into a surface network to see how back-pressure and shared constraints affect the whole system. The course also covers screening for hydrate and wax risk inside the model, and closes with a practical workflow for keeping models current as wells and reservoirs change.
Production
optimisation depends on models, and models depend on calibration. An
uncalibrated model can suggest tubing changes, lift settings or choke openings
that make no difference in the field, or that cause problems elsewhere in the
system. The difference between a model that supports decisions and one that
misleads is usually the discipline applied to data, PVT and correlation
matching rather than the sophistication of the model itself.
Most fields
have more optimisation potential than they realise. Lift gas is often allocated
by habit, ESP frequencies are left at their original settings, chokes are set
to historical values and back-pressure from shared flowlines is accepted as
fixed. A calibrated model lets engineers test changes before making them and
rank opportunities by gain and cost.
Common
failings include building models from unchecked data, using default PVT
correlations when laboratory data exists, matching one test and assuming the
model holds for the life of the well, and optimising single wells without
considering the network they flow into. This course addresses each of these and
gives engineers a repeatable workflow for model building and optimisation.
By the end of this training, participants will be able to:
- Gather, quality-check and reconcile the data needed to build well models.
- Build and match PVT models to laboratory data.
- Select, build and calibrate inflow performance models for oil and gas wells.
- Match vertical lift correlations to gradient surveys and well test data.
- Model surface chokes and size chokes for required rates.
- Model gas lift and ESP wells and evaluate their performance.
- Run sensitivity analyses to identify and rank production optimisation opportunities.
- Build basic surface network models and assess the effect of back-pressure and shared constraints.
- Screen wells and flowlines for hydrate and wax risk using model results.
Organisations sending participants to this training will:
- Have well models that match field data and can be trusted for decisions.
- Identify and rank production optimisation opportunities across wells and networks.
- Improve gas lift allocation, ESP operation and choke settings.
- Reduce the risk of well changes that do not deliver the expected gain.
- Put a consistent modelling and model maintenance workflow in place across the asset.
- Identify flow assurance risks earlier in the operating plan.
Participants will:
- Be able to build and calibrate well models to field data.
- Understand how PVT, inflow and outflow choices affect model results.
- Be able to model gas lift and ESP wells.
- Be able to use sensitivity analysis to find real production gains.
- Understand how wells interact through a surface network.
- Be able to keep models current as field conditions change.
- Production engineers
- Well performance and optimisation engineers
- Artificial lift engineers
- Reservoir engineers working with well and network models
- Production technologists
- Surveillance engineers
- Engineers moving into production modelling roles
Module 1: Data for Production Modelling
- Well, completion and deviation data
- Well tests, gradient surveys and pressure gauge data
- Data quality control and reconciliation
- Setting objectives for a modelling study
Module 2: PVT Modelling
- Black oil and compositional descriptions
- PVT correlations and their ranges of validity
- Matching PVT models to laboratory data
- Water and gas properties
Module 3: Inflow Modelling and Calibration
- Choosing an inflow model for oil and gas wells
- Reservoir pressure, productivity and skin inputs
- Multi-layer inflow
- Calibrating inflow to well test data
Module 4: Vertical Lift Performance Matching
- Multiphase flow correlations and mechanistic models
- Matching to gradient surveys
- Matching to well test rates and pressures
- Temperature modelling
Module 5: Choke Modelling and Sizing
- Critical and subcritical choke flow
- Choke models and calibration
- Choke sizing for target rates
Module 6: Modelling Artificial Lift Wells
- Gas lift well modelling and lift gas response
- ESP well modelling and pump performance
- Diagnosing artificial lift wells from model results
Module 7: Sensitivity Analysis and Well Optimisation
- Sensitivity to tubing, wellhead pressure, skin, water cut and GLR
- Identifying the controlling constraint
- Ranking optimisation opportunities by gain and cost
Module 8: Surface Network Modelling
- Flowlines, manifolds and gathering systems
- Back-pressure effects on well rates
- Shared constraints and system optimisation
- Lift gas allocation across a network
Module 9: Flow Assurance Screening
- Hydrate risk from pressure and temperature profiles
- Wax appearance temperature and deposition risk
- Using model results to set operating limits
Module 10: Model Maintenance Workflow
- Updating models with new test data
- Tracking reservoir pressure and water cut changes
- Documenting assumptions and model versions
Upon successful completion of this training course, delegates will be awarded an official Certificate of Completion issued by the Petroleum Engineers Association (PEA), an ISO 9001:2015 certified training organization. The certificate carries 10 Credits and formally records the total learning hours completed.
Each certificate is signed by the Course Facilitator and the CEO of the Petroleum Engineers Association, and serves as verifiable proof of professional training that delegates can present to employers and professional bodies worldwide.
Frequently Asked Questions
All course bookings made through PEA are strictly non-refundable. By registering for a course, you acknowledge and accept that all fees are payable in full and are not subject to refund under any circumstances, including changes in personal or professional commitments or partial attendance.
PEA reserves the right to make reasonable adjustments to course content, trainers, or schedules where necessary, without entitling delegates to a refund. Comprehensive details of each course — including objectives, target audience, and content — are clearly outlined before enrolment, and it is the responsibility of the delegate to ensure the course's suitability prior to booking.
For any inquiries related to cancellations or bookings, please contact our support team, who will be happy to assist you.